What is a breakout box and what is it used for?

If you’ve ever worked on the electrical setup for a concert, festival or theatre production, you’ll know just how much equipment needs power. From lighting rigs and sound systems to backstage facilities and production equipment, there’s a lot to supply, often across a large venue or site.

Breakout boxes, or power distribution units as they’re also known, are one of the ways that power gets distributed to all of that equipment, and they’re something we’ve been manufacturing at Rubber Box for more than 30 years. In that time, we’ve supplied equipment to over 2,500 festivals, built more than 80,000 bespoke distros and worked with some of the biggest venues and events in the UK and across more than 30 countries worldwide.

So, what exactly is a breakout box, how does it work and where is it used?

What is a breakout box?

A breakout box is an electrical distribution unit that takes an incoming power supply and distributes it across multiple outgoing sockets or circuits. Instead of needing a separate supply cable for every piece of equipment, a breakout box provides several connections from one distribution point.

In the entertainment industry, these are commonly known as breakout boxes or distros. You’ll also find the same type of equipment used in construction, industrial settings and other sectors, where it’s usually referred to as a power distribution box.

The size and configuration of a breakout box depends on what it needs to supply. Some have just a few 16A outlets, while others take larger three-phase supplies and distribute power across multiple circuits with different socket ratings.

How does an electrical breakout box work?

Power enters the breakout box through an incoming connection and is distributed to the outgoing sockets, with circuit protection fitted inside the enclosure.

For example, our RUB1408 32A breakout box takes a 32A single-phase supply and distributes it across four 16A outlets. Each outlet has its own RCBO, which protects against overloads, short circuits and earth leakage.

That individual protection is important when you’re supplying several pieces of equipment. If a fault develops on one circuit, it can be disconnected without affecting the others.

You’ll also find breakout boxes designed for three-phase supplies, where the incoming power is distributed across different phases. Our RUB1852, for example, takes a 32A three-phase supply and provides three individually protected 32A single-phase outlets.

Whatever the configuration, the box doesn’t increase the amount of power available. The total connected load still needs to stay within the capacity of the incoming supply, and three-phase installations also need to account for how the load is distributed across the phases.

Where are breakout boxes used?

Breakout boxes are used across the entertainment industry, from touring productions and small music venues to major festivals and television studios. The electrical requirements can vary considerably between these environments, which is why there are so many different configurations available.

Concerts and live music events

At a live music event, there might be lighting equipment above the stage, amplifiers and instruments at floor level, and sound equipment positioned elsewhere around the venue.

Breakout boxes are used at different points in the electrical distribution system to supply these areas, with the connections and ratings chosen to match the equipment.

For touring productions, there’s also the practical side of getting everything set up. Equipment is regularly transported between venues, and the electrical installation needs to be assembled, checked and dismantled as part of each event.

Festivals and outdoor events

The scale of power distribution at a festival can be considerable. As well as the stages themselves, there are backstage areas, production compounds, catering facilities and temporary structures that all need electricity.

Breakout boxes form part of the wider temporary distribution system, with different units used depending on the available supply and the requirements of each area.

Outdoor events also bring their own challenges. Equipment can be exposed to rain, dust and mud, as well as the knocks and impacts that come with being moved around site. The enclosure and the level of ingress protection are therefore important when choosing equipment for these installations.

Theatre and stage lighting

In theatre and stage lighting, breakout boxes often need to accommodate connections used specifically within the entertainment industry. Our RUBTR8 32A breakout box is a good example. It has a 32A three-phase input, six 16A outlets and a 19-pin Socapex connection.

Socapex connectors are commonly used in stage lighting because they carry multiple circuits through a single multicore cable. Rather than running six separate cables between the distribution equipment and the lighting rig, those circuits can be carried together.

On the RUBTR8, the Socapex circuits are wired in parallel with the corresponding 16A outlets, so the connected loads need to be considered together.

TV and film productions

Breakout boxes are also used on film and television productions, where lighting, monitoring equipment and other electrical systems need power across studios and filming locations.

The requirements can change throughout a production, especially when filming moves between sets or locations. Having portable distribution equipment means the electrical setup can be arranged around the equipment being used, rather than relying entirely on fixed connections.

Why do we use solid rubber for our breakout boxes?

When you’re supplying equipment to the entertainment industry, you know it’s going to spend a lot of its working life being moved around. Boxes are loaded into vehicles, transported between venues, handled during event builds and packed away again once the production is finished.

That’s one of the reasons we manufacture our breakout boxes using solid rubber enclosures. They’re highly impact resistant and designed to protect the electrical components inside from the knocks and bumps that come with regular handling.

Rubber also won’t rust or corrode in the way a metal enclosure can, which is useful for equipment that’s regularly used outdoors or exposed to difficult conditions.

There are electrical benefits too. Rubber is non-conductive, and our boxes are double insulated, meaning there are two levels of insulation separating live electrical parts from the outside of the unit.

For outdoor events, the level of ingress protection is another consideration. Our solid rubber enclosures can provide protection up to IP65, depending on the connectors fitted. At IP65, the enclosure is dust tight and protected against water jets, helping keep dust and water away from the electrical components inside.

The shape and size of the enclosure also matter. Some applications need a compact box with a handful of outlets, while others call for a larger unit with more connections and circuit protection. We manufacture our enclosures in a range of configurations to suit these different requirements.

What should you look for when choosing a breakout box?

The first thing to establish is the electrical supply you’ve got available and what you need to connect to it.

A 32A single-phase supply, for example, will need a different distribution arrangement from a 63A three-phase supply. You’ll also need to consider how many outlets are required, their current ratings and the total load of the connected equipment.

Then there’s circuit protection. Depending on the unit, this might include MCBs, RCDs or RCBOs, with individual protection on each output where required. The protection needs to be suitable for the electrical installation and the equipment being supplied.

It’s also worth thinking about where the box will be used. Equipment intended for an indoor venue may have different requirements from a unit being used at an outdoor festival, where ingress protection and the durability of the enclosure become more important.

And while there are plenty of standard configurations available, sometimes you need something more specific.

That’s why we also manufacture bespoke power distribution boxes. If you need a particular combination of inputs, outputs, connectors or circuit protection, we can design and manufacture a unit around those requirements.

Breakout boxes from Rubber Box

We’ve spent more than 30 years designing and manufacturing power distribution equipment, with our boxes used at some of the largest events and venues around the world.

Our range covers everything from compact 16A distro boxes to 400a units. We also keep more than 10,000 boxes in stock at any one time, and every unit we manufacture is tested and checked by our engineers before leaving our factory.

If you’re looking for a breakout box for an upcoming event or production, you can browse our range of power distribution boxes or speak to our team about the right configuration for your requirements on 01282 677 910, or email info@rubberbox.co.uk and we’ll be happy to help!

Related Articles

If you can think of it we can build it...

Bespoke power distro boxes built-to-order

We manufacture bespoke power distro boxes to our customer’s individual requirements

Get a free quote

Save up to 30% off on all rubberboxes

Sign up and save open a trade account today!

Sign Up

We're Rated Excellent